Sensor Pod (SP) and Remote Sensor (RS) event code IDs extracted from AOS 6.4.4/nb250 APP 6.4.5.
Sensor Pod refers to NBPD0150 optional sensor pods and remote sensors refer to AP9520 A-link sensors.
***********************************************

; RS: Sensor connected.
0x1901

; RS: TH Sensor connected.
0x191E

; RS: Sensor Disconnected.
0x1902

; RS: Maximum Temperature Threshold Violation.
0x1903

; RS: Maximum temperature threshold violation cleared.
0x1904

; RS: High Temperature Threshold Violation.
0x1905

; RS: High temperature threshold violation cleared.
0x1906

; RS: Low Temperature Threshold Violation.
0x1907

; RS: Low temperature threshold violation cleared.
0x1908

; RS: Minimum Temperature Threshold Violation.
0x1909

; RS: Minimum temperature threshold violation cleared.
0x190A

; RS: Maximum Humidity Threshold Violation.
0x190B

; RS: Maximum humidity threshold violation cleared.
0x190C

; RS: High Humidity Threshold Violation.
0x190D

; RS: High humidity threshold violation cleared.
0x190E

; RS: Low Humidity Threshold Violation.
0x190F

; RS: Low humidity threshold violation cleared.
0x1910

; RS: Minimum Humidity Threshold Violation.
0x1911

; RS: Minimum humidity threshold violation cleared.
0x1912

; RS: Short-term increasing temperature rate of change violation.
0x1913

; RS: Short-term increasing temperature rate of change violation cleared.
0x1914

; RS: Short-term decreasing temperature rate of change violation.
0x1915

; RS: Short-term decreasing temperature rate of change violation cleared.
0x1916

; RS: Long-term increasing temperature rate of change violation.
0x1917

; RS: Long-term increasing temperature rate of change violation cleared.
0x1918

; RS: Long-term decreasing temperature rate of change violation.
0x1919

; RS: Long-term decreasing temperature rate of change violation cleared.
0x191A

; RS: Configuration change. .
0x191B

; RS: Reset to defaults successful.
0x191C

; RS: Reset to defaults failed.
0x191D

; RS: Firmware downloading started.
0x191F

; RS: Firmware downloading completed.
0x1920

; SP: Communication established.
0x2F01

; SP: SP Communication established.
0x2F2C

; SP: Communication lost.
0x2F02

; SP: Sensor connected.
0x2F03

; SP: SP Sensor connected.
0x2F2A

; SP: Sensor Disconnected.
0x2F04

; SP: Maximum Temperature Threshold Violation.
0x2F05

; SP: Maximum temperature threshold violation cleared.
0x2F06

; SP: High Temperature Threshold Violation.
0x2F07

; SP: High temperature threshold violation cleared.
0x2F08

; SP: Low Temperature Threshold Violation.
0x2F09

; SP: Low temperature threshold violation cleared.
0x2F0A

; SP: Minimum Temperature Threshold Violation.
0x2F0B

; SP: Minimum temperature threshold violation cleared.
0x2F0C

; SP: Maximum Humidity Threshold Violation.
0x2F0D

; SP: Maximum humidity threshold violation cleared.
0x2F0E

; SP: High Humidity Threshold Violation.
0x2F0F

; SP: High humidity threshold violation cleared.
0x2F10

; SP: Low Humidity Threshold Violation.
0x2F11

; SP: Low humidity threshold violation cleared.
0x2F12

; SP: Minimum Humidity Threshold Violation.
0x2F13

; SP: Minimum humidity threshold violation cleared.
0x2F14

; SP: Short-term increasing temperature rate of change violation.
0x2F15

; SP: Short-term increasing temperature rate of change violation cleared.
0x2F16

; SP: Short-term decreasing temperature rate of change violation.
0x2F17

; SP: Short-term decreasing temperature rate of change violation cleared.
0x2F18

; SP: Long-term increasing temperature rate of change violation.
0x2F19

; SP: Long-term increasing temperature rate of change violation cleared.
0x2F1A

; SP: Long-term decreasing temperature rate of change violation.
0x2F1B

; SP: Long-term decreasing temperature rate of change violation cleared.
0x2F1C

; SP: Sensor connected.
0x2F1D

; SP: SP dry contact sensor connected.
0x2F2B

; SP: Sensor Disconnected.
0x2F1E

; SP: sensor abnormal state with 'critical' severity.
0x2F1F

; SP: sensor abnormal state with 'critical' severity cleared.
0x2F20

; SP: sensor abnormal state with 'warning' severity.
0x2F21

; SP: sensor abnormal state with 'warning' severity cleared.
0x2F22

; SP: sensor abnormal state with 'informational' severity.
0x2F23

; SP: sensor abnormal state with 'informational' severity cleared.
0x2F24

; SP: Firmware downloading started.
0x2F25

; SP: Firmware downloading completed.
0x2F26

; SP: Configuration change. .
0x2F27

; SP: Reset to defaults successful.
0x2F28

; SP: Reset to defaults failed.
0x2F29